Story-Worthy Dimensional Inspection Service

Built for responsiveness.

Our labs strive to provide services worth telling others about. We've structured our entire operation to be responsive to your needs – from precision equipment to be used on your type of parts, to IT systems built for optimum communications; we strive in every way to provide story-worthy service.

To take you to the next step.

When you begin a project with QC Inspection, we'll want to know your stated and unstated project needs. We value making and keeping aggressive commitments to help you get to the next step in your project. With a vast set of resources in multiple locations, there is always a way to get your measurement job done.

Lab Equipment, Capabilities.

Coordinate Measuring Machines (CMM)

• Brown & Sharpe CMMs with Continuous Scan (PC-DMIS)
• Zeiss Contura with Continuous Scan (Calypso)
• OGP Vision CMMs (Measuremind)
• Optiv Performance with Chromatic White Light Interferometry Scanning
• Optiv Classic (PC-DMIS)
• FARO/LDI Portable CMMs with Laser Scanners

Scanning Capabilities

• LDI Surveyor 3D Laser Scanners
• Cyberscan Confocal Micro-Scanners
• Chromatic White Light Interferometry Scanning
• Full-Contact Continuous CMM Scanning

Surface Finish Evaluation

• Zeiss Surfcom Profilometers
• CyberScan Laser Micro-Scanner (non-contact surface finish)

Support Capabilities

• Optical Comparators and other standard dimensional inspection equipment
• Robust Inventory Control System
• 2,000 lb hoist capacity
• Class 10,000 Clean Room Inspection
• Polishing Wheel
• Cutoff Machine
• Horizontal Bandsaw
• Parts Cleaning Station
• Wire EDM Resources

For specific inquiries about equipment, software, platforms and capability, send us a message or call 952-895-1150.

Qualifications, Accreditations, and Certifications.

A2LA Accredited to ISO/IEC 17025:2005

ISO/IEC 17025:2005 specifies the general requirements for the competence to carry out tests and/or calibrations, including sampling. It covers testing and calibration performed using standard methods, non-standard methods, and laboratory-developed methods. - ISO.org

View Accreditation & Scope

ASQ Certifications

All inspectors are certified to one or more of the following:

• CQI (Certified Quality Inspector)
• CMI (Certified Mechanical Inspector)
• CQT (Certified Quality Technician)
• CQE (Certified Quality Engineer)
• CQM (Certified Quality Manager)
• CQA (Certified Quality Auditor)

ITAR Registered

JCP Registered

SAM Registered

DCS Certified

NADCA Participation

Federal Firearms License

Sample Reports, Deliverables

Bubbled Print

Download the PDF 1,012.42 KB

First Article Inspection Report (FAI)

Download the PDF 47.09 KB

Certificate of Inspection

Download the PDF 60.84 KB

Statement of Uncertainty

Download the PDF 53.50 KB

Do you have special delivery requirements? We routinely customize our reports and data delivery based on customer need. Send us a message or call 952-895-1150 with special considerations.

When to use 3D precision scanning for your project.

Is your project in the development stage?

When you need quick feedback on the overall part to determine its accuracy to the design, a 3D scan may be the best option. A full FAI or even a partial dimensional inspection may be more than is necessary when performing an initial validation.

Are you making a comparison of one part to another?

Comparing cavity-to-cavity or supplier-to-supplier can be a daunting task if the results are presented in as a list of print features. A 3D comparative analysis can highlight trouble spots quickly. Perhaps then you will need more detailed information with a dimensional inspection of a localized area.

Is your part primarily controlled by profile with a few critical dimensions?

Industries continue to define more of a product’s features with profile tolerances. A 3D scan is the most descriptive method for reporting a profile and the variations throughout the surface. Your project may require that specific numerical profile data must be collected with a CMM. That same data can be reported from a scan output.

Combine Scanning With Traditional Inspection

In these situations, we may recommend a hybrid inspection solution for your project that utilizes the 3D scanning and processing capabilities of QC Engineering, or combines these capabilities with traditional inspection techniques to provide the most useful data possible.

Send us a message or call us 952-895-1150, and let us guide you to the right solution.